italiano english links
francais polski
español русский
gallery
deutsch
home accesso area utenti news
azienda prodotti contatti
gallery quasar
quasar
gallery grainsystem
profilo
grainsystem
storia
dove siamo
  PRODUCTIVITY GROWS
GS480, GS530, GS600 and GS720 "Grain System EVO" cutting platforms tune in immediately with any combined harvester and comply with the requirements of the most exacting contractor because they harvest the product quickly and well under any weather and environmental conditions. First of all, however, they are the ideal solution for those who wish to reduce the unproductive times needed for towing and detaching the trolley as it is the case with fixed conventional platforms, with an increase in productivity of about 30%.

READY IN 45 SECONDS

Thanks to the exclusive patented folding system, a "Grain System EVO" can fold in just 45 seconds. When you reach the field, the platform opens again in 45 seconds and is ready for work.

HYDRAULIC CONTROL AT THE DRIVER'S SEAT
The operator maneuvers the platform without leaving the cabin. By using the original controls of the combined harvester and by pressing just one button, the platform would open and close fully automatically.

A SHARP CUT WITH NO INTERRUPTIONS
The cutting blade has an exclusive feature that distinguishes the Grain System EVO machines from other folding platforms. In the working position it is hooked in one piece with no interruptions, thus ensuring an even and sharp cut throughout the working width at all times.
STABILITY, VISIBILITY AND DRIVING SAFETY
Grain System platforms guarantee a great driving and maneuver safety both on the road and on a bumpy ground.. The width of the folded machine is 3.20 m for the GS 600 and 3.45 m for the GS 720 EVO platform. Its cantilever overall dimensions down to 1.78 m only offers incomparable visibility. Not to mention that its limited weight – between 1920 and 2470 kg, according to model – not only contributes to stability, but also leaves room to the loading capacity of the combined harvester.

BIGGER AND BIGGER AT WORK
• A large feeding screw (610 mm) with retractile fingers along its whole length.
• A cutting width 4.65 to 7,00 according to model
• Transmission on one side of the platform, an exclusive feature of the “Grain System EVO” range of machines.
• A short distance between the feeding screw and the conveyor channel ensures a perfect feed whatever the product conditions may be.
• Hydraulic transmission to the reel by means of a proportional rev variator based on the combined harvester movement.
• Possibility of modifying the platform slant for better penetrating the crop or for some kinds of soy.
• Cutting blade always hooked in one piece without interruptions in its working position. This exclusive feature of the new series ensures a sharp even cutting along the whole platform at all times.
• Platform control on one side.
 
   
   
   
   
   
 
TECHNICAL DATA
Folding up time 45 sec Hydraulic reel variator  
Opening time 45 sec Overall size on the road 3.00-3.20 m
Screw diameter 610 mm Height 1.82 m
Reel diameter 104 mm Cantilever length 1.78 m
       
TYPE CUTTING WIDTH m OVERALL SIZE ON THE ROAD WEIGHT kg
GS 480 4.65 3.00 1920
GS 530 5.16 3.00 2150
GS 600 5.88 3.20 2380
GS 720 7.00 3.45 2470
The technical data are not binding on us and may be modified without prior notice
depliant (pdf)
(644 Kb)
Grain System 2007 (ENG)
(6,7 Mb)
Grain System at work
(1,8 Mb)
 
torna su